![microseven wont email video microseven wont email video](http://cdn.slipstick.com/images/2015/outlook/shell-opennew-reg.png)
Camera with a 5MP or 4MP are not compatible with NVRs and DVRs that decode 1080p cameras.If your DVR or NVR is showing video loss or no video it may be because your system is not able to decode the video stream of different brands of cameras. Use external IR illuminators or a floodlight.Check the settings on your NVR/DVR to make sure the IR is on.So not having working IR night vision is a big hassle. The building is dark inside and out and the need for IR night vision cameras is essential. One of the main reasons many security cameras are installed is to keep an eye on things at night when the business is closed and unoccupied. For cellular security cameras, make sure the SIM card is properly inserted and data is not maxed out.Cameras on a wireless network segment, check network and possible network interruption.Reconnect BNC connector and unplug PoE switch to troubleshoot video loss on analog and IP PoE cameras.Avoid physical barriers (walls, trees, etc.).Choose the right channel (some routers can emit 2.4 and 5 GHz signals).Move your cameras closer to the router if possible (or your router closer to the cameras if not).WiFi signal interruption and interference.There are too many physical barriers between your camera and the router.The camera(s) are too far away from the home router.Video loss or weak video signal on security cameras on a wireless network segment could be caused by unstable network connections, a weak WiFi connection or low internet bandwidth. Reason #3: Weak WiFi Connection or Low Bandwidth Use a block of wood in between if there’s no non-metal surface for mounting your cameras.UPS (uninterruptible power supply) units will protect your equipment from power outages.Use power and lightning surge protectors to protect your equipment.
![microseven wont email video microseven wont email video](https://i.ytimg.com/vi/6-J6wcwMgUw/maxresdefault.jpg)
Electrical current interference from nearby electrical equipment.Mounting the cameras to a metal/conductive surface.It is likely to cause a sudden video loss, total black screens or vertical lines as well as serious damage to the cameras circuit boards or other components. If you are using battery-powered cameras, make sure the battery is not dead or the solar charger is blocked.Ī power spike can be an awful problem for a system.Try using shorter BNC or Ethernet cables to power cameras and avoid using low-quality extension cables or extension cords.
![microseven wont email video microseven wont email video](https://img.bhs4.com/cc/d/ccd39cda54ccbb0eeb26c537de5c9cf7b6b28b78_large.jpg)
This is because PTZ cameras and IR cameras require more electricity.